NEW FERRIC-ERMAK POWER BEND PRO FALCON 3760 X 175, 5 Axes Synchronized Hydraulic Press Brake

If your aim is to provide important improvements in quality, productivity, esthetic and security aspects, the ERMAK Power Bend series is what you are looking for.

Power Bend series are developed to work with a wide range and variety of customer products and significantly increases the productivity due to the short set up times.

Maximum accuracy with the beam is achieved by means of an electro-hydraulic synchronized control (Y1-Y2), consisting out of linear scales and hydraulic proportional valves, guaranteeing bending angles with maximum precision, together with a two axes heavy duty precise back gauge (XR)

User friendly angle programming with the ERTouch numerical & 2D CNC control, makes this machine a must for every fabricating shop.

POWER BEND Pro Falcon BRAKES ARE STANDARD EQUIPPED WITH:

- Mono block, welded steel frames, rigid to deflection movement and high tensile with ST44 A1 material.

- 5 axes: Y1-Y2-X-V CNC crown.

- Synchronization accuracy of the beam +/- 0,001” by means of linear encoders and hydraulic proportional valves.

- Heavy Duty XR two axes motorized back gauge system on ball screws

- Electrical cabinet with cooling fan, compliant with the CSA standards.

- Double acting foot pedal control

- Throat depth 16.1” (410 mm).

- Top tool clamping for European & N.A. style tool.

- Quick release from the top tool.

- Sliding front support arm movable along the length of the bed.

- Tip hardened top tool 

- V hardened Multi V die.

- Back and side guarding with inter-lock switches to the machine controls.

- Full covering of the piston stroke to avoid damage.

- AKAS Fiessler laser type beam movement interference safety 

- Ergonomic mounted CNC control.

- CNC controlled crowning table

- ERTouch numerical & 2D graphic control 

CAPACITY: 175 Metric Ton - 193 US Short Tons

BENDING LENGTH: 148” (3760mm) Overall

128” (3250mm) Between Side Frames

Technical Specifications: Inches millimeter

- Fast approach speed Y axes 425”/min. 180mm/sec.

- Bending speed 23.6”/min. 10mm/sec.

- Fast return speed Y axes 319”/min. 135mm

- Back gauge stroke X axes 30” 800mm

- Back gauge positioning speed 540”/min. 230mm/sec.

-Stroke R axes       9.84” 250mm

- Number of back gauge fingers 2 2

- Oil capacity 200 liter 200 liter

- Motor 22 HP. 15 kW

- Stroke Y axes 10.8” 275mm

- Daylight opening 21.6” 550mm

- Throat depth 16.1” 410mm

- Table height 35.4” 900mm

-Table width 3.5” 90mm

- Total machine width (approx.) 78” 2000mm

- Total length (excl. control arm) 164” 4200mm

- Total height (approx.) 110” 2800mm

- Approx. Weight 24,140 Lb. 10.95 Ton