FABMASTER IW55A Hydraulic Ironworker

FABMASTER IW55A Hydraulic Ironworker

orCall (604) 472-1444

Description

  • Punching: 
    • Punching Pressure 55 Ton
    • Punch Capacity Ø 3/4″ x 11/16”
    • (diameter x thickness) 1-1/2” x 5/16”
    • Throat Depth S: 6-1/2”
    • Maximum Stroke Length 1-1/8”
    • Cycles/Min. (15 mm stroke) 24
    • Working Height Up to Die 33”
  • Punching Pressure 55 Ton
  • Punch Capacity Ø 3/4″ x 11/16”
  • (diameter x thickness) 1-1/2” x 5/16”
  • Maximum Stroke Length 1-1/8”
  • Cycles/Min. (15 mm stroke) 24
  • Working Height Up to Die 33”
  • Flat Shearing: 
    • Flat Bar Shearing 12” x 1/2″
    • (width x thickness) 8” x 5/8”
    • Blade Length 12-1/4”
    • Angel Flange Trim 4”
    • Working Height 45-1/4”
  • Flat Bar Shearing 12” x 1/2″
  • (width x thickness) 8” x 5/8”
  • Blade Length 12-1/4”
  • Angel Flange Trim 4”
  • Working Height 45-1/4”
  • Angle Shearing: 
    • At 90° Shearing 3” x 3” x 1/4”
    • At 45° Miter Shearing —
    • Working Height 39-1/2”
  • At 90° Shearing 3” x 3” x 1/4”
  • At 45° Miter Shearing —
  • Working Height 39-1/2”
  • Bar Shearing: 
    • Round Bar Shearing Ø 1-1/8”
    • Square Bar Shear 1” x 1”
    • Channel Shear 3”*
    • H Beam Shear 3”*
    • Working Height 39-1/2”
  • Round Bar Shearing Ø 1-1/8”
  • Square Bar Shear 1” x 1”
  • Channel Shear 3”*
  • H Beam Shear 3”*
  • Working Height 39-1/2”
  • Notching: 
    • Rectangular Notcher (W x D x T) 2” x 3-1/2” x 1/4”
    • Vee-Notcher (Side x Side x T) 3-1/2” x 3-1/2” x 5/16”*
    • Working Height 41-1/4”
  • Rectangular Notcher (W x D x T) 2” x 3-1/2” x 1/4”
  • Vee-Notcher (Side x Side x T) 3-1/2” x 3-1/2” x 5/16”*
  • Working Height 41-1/4”
  • Special Tooling: 
    • Single Vee Press Brake (W x T) 6” x 5/16”*
    • Angle Bending 2-1/2” x 5/16”*
    • Multi Vee Press Brake (W x T) 10” x 1/8″*
    • Pipe Notching Ø 2-1/2”*
  • Single Vee Press Brake (W x T) 6” x 5/16”*
  • Angle Bending 2-1/2” x 5/16”*
  • Multi Vee Press Brake (W x T) 10” x 1/8″*
  • Pipe Notching Ø 2-1/2”*
  • Other: 
    • Electric Power (HP) 5 HP / 220 Volt / 3 Ph
    • Net Weight (approx.) 1,853 lbs
    • Gross Weight (approx.) 2,073 lbs
    • Machine Dimensions 41” x 30” x 59”
    • (L x W x H) (approx.)
    • Packing Dimensions 52” x 37” x 70”
    • (L x W x H) (approx.)
  • Electric Power (HP) 5 HP / 220 Volt / 3 Ph
  • Net Weight (approx.) 1,853 lbs
  • Gross Weight (approx.) 2,073 lbs
  • Machine Dimensions 41” x 30” x 59”
  • (L x W x H) (approx.)
  • Packing Dimensions 52” x 37” x 70”
  • (L x W x H) (approx.)
  • Optional Tooling Available
    • Show All

    Specifications

    ConditionNew
    Throat depth s6-1/2”